Shower screens
Shower screen measuring guide
Which measurement is which for shower screens, and general notes for recording your opening.
Measuring for wardrobe doors? How to measure your wardrobe opening
Front screen and return panel
- A: Front width. The opening the front screen spans, from one side to the other. Every order needs this measurement.
- B: Return panel width. The side panel that meets the front screen at the corner. Only needed if you add a return panel, and measured separately.
- On the Adjustable Semi-Frameless Shower Screen page, enter A first. It is used exactly as you enter it, and only the standard front sizes that cover it, in your finish, are shown.
- If you add a return panel, enter B in its own step. It never replaces A.
- Standard sizes differ by finish.
- A width outside the standard sizes is a custom size. It is made to order and can’t be ordered online.
The diagram is drawn from above, with the return panel on the right as an example. Exact measuring points for this screen haven’t been published yet, and this guide can’t confirm that a screen will fit your shower.
General notes
1
Width, three times
Measure the opening width at the top, middle and bottom. Write down the smallest.
2
Height, both sides
Measure the height on the left and the right, from the tray or bath edge to where the screen needs to finish. Write down the smallest.
3
Note what gets in the way
Record taps, windows, a hob, a bulkhead, or walls that are out of square. A photo of the opening helps when specifications are available.
These notes are for shower screens. Wardrobe doors have their own measuring guide.
Sizes aren’t listed for every screen yet, and these notes can’t confirm that a screen will fit.